Pond Plumbing

Ideal Pond Water Circulation
When designing your DreamPond one of the most important aspects is water circulation. While creating a flow current inside the pond one should try to eliminate areas in the pond that we call dead spots. A dead spot is an area inside the pond that does not naturally get a flow of water. If a pond has a bad dead spot or multiple dead spots waste and old debri will remain stagnant there and pollute the water. With the incorporation of DreamPond’s TPR any hobbyist designing a pond should be able to create a flow design that covers every angle of the pond creating an ideal pond water circulation. With an ideal flow circulation pattern established the pond will be able to more effectively flow waste to the bottom drain ,and out of the pond into the filtration system.

DreamPond now makes a TPR - Tangential pond return that allows for hobbyist to return the water at a straight, or 45° return angle. With the ability to return water back into your pond from multiple angles it allows for the hobbyist to create the most optimal water flow conditions inside the pond.

More advantages seen in our TPR’s is the ease in the ability to install. Our TPR’s are designed to be clamped securely from the front, or for example from the inside of the pond. Traditional bulkhead installations require hobbyist to tighten the bulkhead from behind making for a more difficult installation.

Filter
Sort by:
Show:
Bulkhead & Uniseal FittingsPlumbing

Uniseal Tank Connector 1"

UNISEAL®  1"Pipe ID               1"  Pipe OD             1.315"Holesaw Size     1 3/4"Instructions for Using THE ORIGINAL PATENTED...
$4.75
Bulkhead & Uniseal FittingsPlumbing

Uniseal Tank Connector 3/4"

UNISEAL®  3/4"Pipe ID              3/4"Pipe OD            1.505"Holesaw Size    1.250"Instructions for Using THE ORIGINAL PATENTED UNISEAL® 1/ Cut hole to the holesaw size indicated for the UNISEAL you are using. (See specification...
$4.25
Bulkhead & Uniseal FittingsPlumbing

Uniseal Tank Connector 1/2"

UNISEAL®      1/2"Pipe ID            1/2"Pipe OD           0.840"Holesaw Size   1 1/4"Instructions for Using THE ORIGINAL PATENTED UNISEAL® 1/ Cut hole to the...
$4.25
Valterra Gate Valve 1.5" SxS Unibody
Ball & Gate ValvesPlumbing

Valterra Gate Valve 1.5" SxS Unibody

Valterra Gate Valve - Unibody 1 1/2" SxS w/ Plastic Paddle
$9.95
Valterra Gate Valve 2" SxS w- Plastic Paddle
Ball & Gate ValvesPlumbing

Valterra Gate Valve 2" SxS w- Plastic Paddle

Valterra Gate Valve 2" S x S w/ Plastic Paddle
$18.50
Valterra Gate Valve 6" Stainless Steel Paddle
Ball & Gate ValvesPlumbing

Valterra Gate Valve 6" Stainless Steel Paddle

6" Knife Gate Valve (SlipxSlip)w/ Stainless Steel Paddle and Handle
$325.00
Single Union Ball Valve 2" SxS
Ball & Gate ValvesPlumbing

Single Union Ball Valve 2" SxS

Single Union Ball Valve (Sch 80 PVC)Available in 1 1/2" and 2" SxS
$18.00
True Union Ball Valve 1" SxS
Ball & Gate ValvesPlumbing

True Union Ball Valve 1" SxS

True Union Ball Valve SxSAvailable in  1" and 1.5"
$11.00
Single Union Ball Valve 1.5" SxS
Ball & Gate ValvesPlumbing

Single Union Ball Valve 1.5" SxS

Single Union Ball Valve (Sch 80 PVC)Available in 1 1/2" and 2" SxS
$16.00
True Union Ball Valve 1.5" SxS
Ball & Gate ValvesPlumbing

True Union Ball Valve 1.5" SxS

True Union Ball Valve SxSAvailable in  1" and 1.5"
$18.00
3" PVC Ball Valve
Show: